Altigen MAXCS 7.5 Polycom Configuration Guide Manuel d'utilisateur télécharger pdf (Page 17)

Polycom Configuration Guide Page 17 of 24

Configure Line Park

The Line Park feature is a kind of call park method. You can configure line park spots for a user to park calls on the

Polycom phone.

1. In MAXCS Administrator, set up Line Park groups (select PBX > Line Park Configuration). For detailed

instructions, refer to the MAXCS Administration Manual.

2. Select PBX > AltiGen IP Phone Configuration. Switch to the Polycom tab. Select the extension.

The page shows you ten customizable sets of fields; each one is a lamp slot. You can configure a BLF slot

or a Line Park slot for each of the ten sets of fields.

3. In any available lamp slot (1-10), select Line Park from an open slot’s pull-down menu.

Figure

25: Example of a Polycom phone display showing Line Park slots LP13 and LP14

Figure

26: Configure Line Park Groups

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Altigen MAXCS 7.5 Polycom Configuration Guide Manuel d'utilisateur Page 17