Altigen MAXCS 7.5 Polycom Configuration Guide Manuel d'utilisateur télécharger pdf (Page 12)

Polycom Configuration Guide Page 12 of 24

Figure 15: The Polycom configuration tool TLS Applications panel

10. Select Settings > Provisioning Server > DHCP.

• Set Boot Server to Static

Note: For some phone models, the DHCP options are found under Settings > Provisioning Server.

Figure 16: The Polycom configuration tool DHCP menu

11. Select Settings > Provisioning Server.

• Set Server Type to HTTPS

• Set Server Address to the MAXCS System IP address (in our example, this is 206.40.10.25) – use the

public IP address for external IP phones; use the private IP address for internal IP phones

• Set Server User to the extension number (in our example, this is 266)

• Set Server Password to 5656 (or whatever password you entered as the IP extension’s SIP

Registration password on page 7)

Figure 17: The Polycom configuration tool Provisioning Server panel

12. The phone should reboot automatically. If it does not reboot, select Utilities > Reboot Phone. The phone

should register after it reboots.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Altigen MAXCS 7.5 Polycom Configuration Guide Manuel d'utilisateur Page 12